Institute of Chemical Engineering
> Zum Inhalt

Standards

This is a list of our standards:

Norm Titel
ÖNORM M5861-1Manual determination of particle concentrations in fluid gases - Gravimetric method - General requirements
ÖNORM M5861-2Manual determination of particle concentrations in fluid gases - Gravimetric method - Special metrological requirements
ÖNORM B8303Dimensioning of titled stoves - Testing
DIN 51718Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51719Testing of solid fuels - Solid mineral fuels - Determination of ash content
DIN 51720Testing of solid fuels - Determination of volatile matter content
DIN 51730Testing of solid fuels - Determination of fusibility of fuel ash
DIN 51900-2Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter
DIN 51900-3Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
EN 303-5Central-Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 12809Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
EN 12815Residential cookers fired by solid fuel - Requirements and test methods
EN 12880Characterization of sludges - Determination of dry residue and water content
EN 13229Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 13240Room heaters fired by solid fuels - Requirements and test methods
EN 14212Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
EN ISO 18122Solid biofuels - Determination of ash content
EN 14785Residential space heating appliances fired by wood pellets - Requirements and test methods
EN 14789Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry
EN ISO 18123Solid biofuels - Determination of the content of volatile matter
EN 15250Slow heat release appliances fired by solid fuel - Requirements and test methods
EN ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
EN ISO 16994Solid biofuels - Determination of total content of sulfur and chlorine
CEN/TS 15370-1Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method
CEN/TS 15675Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
VDI 2456 Bl.6Gaseous emission measurement; determination of the sum of nitrogen monoxide and nitrogen dioxide as nitrogen monoxide by use of a converter